Follow US!!! SVG Cutting Files
Print & Cut with the Cameo
click image to view larger
1.Open the jpg of the image and then select the Trace option from the top menu. Click on Select Trace Area and then make a box around the image. (just the image you are wanting to print)
2.Uncheck High Pass Filter and move the threshold up until the image is completely yellow. Usually around 80-90%. Then click on trace outer edge.
3.Use the eraser on the left menu to erase the writing to the left of the image. Then group the image and the trace of the image together. You can now resize your image.
4.Change your paper size to 8.5 x 11 and then click to check show registration marks under the Registration mark menu. You can also adjust the margins if you'd like. You must put your image inside the red line and only in the white area or it will not cut correctly.
5.Hit cut and click to print, then place the printed paper on the mat and follow the directions on the right. You will want to check registration marks automatically. Then select cut.
*Note- the yellow triangle in the right upper corner is telling me that the image is not high quality, so you will need to make the image smaller or the print out might be very grainy.
©2012 - 2018 SVG Cutting Files -SVG Files For Silhouette Cameo, Cricut, Sure Cuts A Lot, Free SVG Files, SVG Files, Make The Cut, Sure Cuts A Lot. All rights reserved.|
**Due to the nature of our product we do NOT OFFER refunds of any kind. **